The IMovement type exposes the following members.
Methods
| Name | Description | |
|---|---|---|
 | CamIn |
Not implemented
|
| FlexProfile |
Not implemented
|
| GearIn |
Not implemented
|
| GearInPos |
Not implemented
|
| Home |
Moves to homing position
|
| MoveAbsolute |
Moves axis to given absolute position
|
| MoveAdditive |
Moves axis additive from the current target
|
| MoveRelative |
Moves axis relative distance from the current position
|
| MoveVelocity |
Moves axis in specific velocity
|
| OpenCyclicAnalogChannel |
Not implemented
|
| OpenCyclicPositionChannel |
Not implemented
|
| OpenCyclicTorqueChannel |
Not implemented
|
| OpenCyclicVelocityChannel |
Not implemented
|
| Phasing |
Not implemented
|
| PhasingSlave |
Not implemented
|
| Power |
Powers on or off
|
| SetAbsoluteMeasurement |
Sets absolute measurement
|
| Status |
Not implemented
|
| Stop |
Stops the axis immediately with given deceleration
|
| SynchronOut |
Not implemented
|
| TorqueControl |
Runs motor at given torque
|
| Wait |
Waits until current target reaches.
|
| WriteCyclicAnalog |
Not implemented
|
| WriteCyclicPosition |
Not implemented
|
| WriteCyclicTorque |
Not implemented
|
| WriteCyclicVelocity |
Not implemented
|
